SOLAX BATTERY SCHEDULING

This guide applies to:

• SolaX X1 Hybrid G4
• SolaX X3 Hybrid G4
• Paired with SolaX Triple Power batteries
• Using the SolaX Cloud App (iOS/Android) or web portal

Ensure:

• Your inverter is online
• You have owner-level login access
• Your battery shows available capacity

• Open SolaX Cloud
• Select your inverter
• Go to Settings
• Navigate to Work Mode
• Select Time of Use (TOU)

Why TOU?

TOU mode allows you to schedule specific discharge periods.

If your inverter is set to Self Use, it will prioritise home consumption and may not export during the Happy Hour window.

• In TOU mode, locate the discharge chedule
  
• Add a new time period:
  • Start: 17:30
  • End: 19:30
• Set this period as discharge
• Save settings
  

This instructs the battery to discharge during the Battery Happy Hour window.

To ensure available energy:

• Navigate to Battery Settings
• Locate Min SOC
• Set to 10–20% (typical recommendation)
  

If Min SOC is set too high (e.g. 40–50%), your battery may stop discharging early.

Even if your battery discharges, export may be blocked if:

• Export Control is disabled
• Export limit is set to 0 kW
• DNSP export cap is lower than inverter output
• Installer has locked export permissions

Check:

• Go to Advanced Settings
• Confirm Export Control = Enabled
• Confirm export limit matches your DNSP approval (commonly 5 kW single phase, varies by region)
  

If these settings are locked, contact your installer.

Between 5:30pm–7:30pm:

• Check app dashboard

Look for-

• Battery discharging
• Grid export shown as negative grid consumption
• Export power > 0 kW

If battery is discharging but grid export is 0:

• Your home load is absorbing all energy
• Or export is restricted